Bench Turbidity Meter

• Unsurpassed accuracy with ±0.5 FTU through an extensive range
• Simple to operate
• Calibration Date Storage

The LP 2000 bench top turbidity meter is an essential tool for laboratory water analysis. With its extended range, you can measure from 0.00 to 50.00 FTU and from 50 to 1000 FTU. At the heart of the measuring system is a dependable IR LED (infrared light emitting diode) light source that maintains a consistent emission. It has a useful life which surpasses standard lamps. Its wavelength of 890 nm ensures maximum intensity of diffused light, even in samples of low turbidity, and reduces interference from colors. For a time study, the LP 2000-11 can record up to 500 separate measurements. Information can be transferred to your computer for study and storage with HI 92000 Windows® compatibile software. HANNA instruments® LP 2000 turbidity meter is the clear choice for the laboratory professional.

LP 2000 is supplied complete with glass cuvet, HI 93703-0 and HI 93703-10 calibration solutions, 12 Vdc adapter and instructions. LP 2000-11 is supplied complete with glass cuvet, HI 93703-0, HI 93703-10 and HI 93703-05 calibration solutions, 12 Vdc adapter and instructions.

Available Accessories:

HI 710005

|

110VAC to 12VDC adapter

HI 710006

|

220VAC to 12VDC adapter

HI 731321

|

Measurement cuvets (4 pcs)

HI 93703-0

|

AMCO-EPA-1 cal. Sol. @ 0 FTU (30 mL)

HI 93703-5

|

AMCO-EPA-1 cal. Sol. @ 500 FTU (30 mL)

HI 93703-10

|

AMCO-EPA-1 cal. Sol. @ 10 FTU (30 mL)

HI 93703-50

|

Cleaning solution for cuvets (230 mL)

HI 731318

|

Tissue for wiping cuvets (4 pcs)

HI 92000

|

Windows® compatible software

HI 920010

|

9-pin cable for PC

Specifications:

Range

0.00 to 50.00 FTU / 50 to 1000 FTU*

Resolution

0.01 / 1 FTU

Accuracy (@20°C/68°F)

±0.5 FTU or ±5% (whichever greater)

Typical EMC Deviation

0.2 FTU

Light Source

High Emission Infrared LED

Light Life

Life of the instrument

Light Detector

Silicon Photocell

Battery Type / Life

12VDC through HI 710005 or HI 710006

Environment

32 to 122°F (0 to 50°C); RH 95%

Dimensions

9.1 x 6.7 x 2.7" (230 x 170 x 70 mm)

Weight

1.3 lb (600 g)

Computer Interface

RS232, with optional HI 92000 software (LP 2000-11 only)

Complete Water Analysis Meter

• Good Laboratory Practice (GLP)
• USEPA Compliance
• Custom Calibration Points

The most important parameters needed for water analysis, especially in drinking water are now available in a portable meter. You can obtain lab performance in the field by using the HI 93102. It not only measures turbidity, but also pH, total and free chlorine, bromine, iodine, iron and cyanuric acid (CYS). All this in the palm of your hand and in seconds! Measurements are made quickly and repeatedly through a sophisticated, yet easy-to-use microprocessor. In colorimetric mode, users can select between factory preprogrammed calibration or calibrating the meter on their own, and measure either concentration or relative absorbance of the sample. Up to 25 measured samples can be stored in memory together with time and date.

HI 93102 is supplied complete with glass cuvet, batteries and instructions.

Available Accessories:

HI 731318

|

Tissue for wiping cuvets (4 pcs)

HI 731321

|

Spare measurement cuvets (4 pcs)

HI 93701-01

|

Reagent kit for 100 tests (Free Cl)

HI 731327

|

Rugged carrying case kit

HI 93710-01

|

Reagent kit for 100 tests (pH)

HI 93711-01

|

Reagent kit for 100 tests (Total Cl)

HI 93716-01

|

Reagent kit for 100 tests (Br)

HI 93718-03

|

Reagent kit for 300 tests (I)

HI 93722-01

|

Reagent kit for 100 tests (CYS)

HI 93746-01

|

Reagent kit, 100 pkt for 50 tests (Fe)

HI 93102-0

|

AMCO-EPA-1 cal. Sol. @ 0 NTU (30 mL)

HI 93102-20

|

AMCO-EPA-1 cal. Sol. @ 20 NTU (30 mL)

Specifications:

Range Turbidity

0.00 to 9.99 NTU & 0.0 to 50.0 NTU*

Range Bromine

0.00 to 8.00 mg/L

Range Free Chlorine

0.00 to 2.50 mg/L

Range Total Chlorine

0.00 to 3.50 mg/L

Range Cyanuric Acid

0 to 80 mg/L

Range Iodine

0.0 to 12.5 mg/L

Range Iron

0.00 to 1.00 mg/L

Range pH

5.9 to 8.5 pH

Resolution Turbidity

0.01 & 0.1 NTU

Resolution Bromine

0.01 mg/L

Resolution Free Chlorine

0.01 mg/L

Resolution Total Chlorine

0.01 mg/L

Resolution Cyanuric Acid

1 mg/L

Resolution Iodine

0.1 mg/L

Resolution Iron

0.01 mg/L

Resolution pH

0.1 mg/L

Accuracy (@20°C/68°F) Turbidity

±0.5% NTU or ±5% of reading (whichever greater)

Accuracy (@20°C/68°F) Bromine

±0.8 mg/L ±3% of reading

Accuracy (@20°C/68°F) Free Chlorine

±0.03 mg/L ±3% of reading

Accuracy (@20°C/68°F) Total Chlorine

±0.03 mg/L ±3% of reading

Accuracy (@20°C/68°F) Cyanuric Acid

±1 mg/L ±15% of reading

Accuracy (@20°C/68°F) Iodine

±0.1 mg/L ±5% of reading

Accuracy (@20°C/68°F) Iron

±0.02 mg/L ±3% of reading

Accuracy (@20°C/68°F) pH

±0.1 pH

Typical EMC Deviation Turbidity

±2% Full Scale

Typical EMC Deviation Bromine

±0.01 mg/L

Typical EMC Deviation Free Chlorine

±0.01 mg/L

Typical EMC Deviation Total Chlorine

±0.01 mg/L

Typical EMC Deviation Cyanuric Acid

±1 mg/L

Typical EMC Deviation Iodine

±0.1 mg/L

Typical EMC Deviation Iron

±0.01 mg/L

Typical EMC Deviation pH

±0.1 pH

Light Source

Pure Green LED

Light Life

Life of the instrument

Light Detector

Two Silicon Photocells

Battery Type / Life

4 x 1.5V AA batteries/ 60 hours or 1,000 measurements

Environment

32 to 122°F (0 to 50°C); RH 95%

Dimensions

8.7 x 3.3 x 1.8" (220 x 83 x 46 mm)

Weight

18 oz. (510 g)

Turbidity and Chlorine Meter

• Good Laboratory Practice (GLP)
• USEPA Compliance
• Logging Capability

With the hand held HI 93114, three important parameters in water quality analysis are at your fingertips. Free and total chlorine measurements and US EPA compliant turbidity measurements are performed quickly and reliably with this lab-grade microprocessor-based field instrument. HI 93114 is particularly useful for potable water measurements and municipalities. The rugged HI 93114 will log data for up to 25 measurements along with time and date information for retrieval at a later date. This instrument also offers Good Laboratory Practice (GLP) features which allow the user to verify the calibration status of the meter. With HI 93114 measurements can be performed using either concentration or relative absorbance of the sample depending on the requirements of the application. HI 93114 can be calibrated using the factory preprogrammed calibration points or can be custom calibrated when in colorimetric mode. This rugged instrument has been engineered to offer all the sophistication and reliability of benchtop laboratory instrumentation in the size of a handheld meter.

HI 93114 is supplied complete with glass cuvet, batteries and instructions.

Available Accessories:

HI 731318

|

Tissue for wiping cuvets (4 pcs)

HI 731321

|

Spare measurement cuvets (4 pcs)

HI 731327

|

Rugged carrying case kit

HI 93701-01

|

Reagent kit for 100 tests (Cl)

HI 93701-03

|

Reagent kit for 300 tests (Cl)

HI 93711-01

|

Reagent kit for 100 tests TCl)

HI 93711-03

|

Reagent kit for 300 tests (TCl)

HI 93102-0

|

AMCO-EPA-1 cal. Sol. @ 0 NTU (30 mL)

HI 93102-20

|

AMCO-EPA-1 cal. Sol. @ 20 NTU (30 mL)

Specifications:

Range

0.00 to 9.99 NTU & 10.0 to 50.0 NTU* (T); 0.00 to 2.50 mg/L (FCl); 0.00 to 3.50 mg/L (TCl)

Resolution

0.01 & 0.1 NTU (T); 0.01 mg/L (Cl)

Accuracy (@20°C/68°F)

±0.5 NTU or ±5% of reading (T); ±0.03 mg/L ±3% of reading (Cl)

Light Source

Pure Green LED

Light Life

Life of the instrument

Light Detector

Two Silicon Photocells

Battery Type / Life

4 x 1.5V AA batteries/ 60 hours or 1000 measurements

Environment

32 to 122°F (0 to 50°C); RH 95%

Dimensions

8.7 x 3.2 x 2.6" (220 x 82 x 66 mm)

Weight

18 oz. (510 g)

Portable Logging Haze Meter for Beer Analysis

• Specifically Designed for Breweries
• Measures According to the EBC Standard
• Log-On-Demand, Up to 199 Samples

Beer clarity is a parameter constantly controlled in breweries. Several substances can cause haze in beer, but the most frequently encountered problem is due to cross-linking of poly phenol and protein. A range of stabilization treatments is available for avoiding haze problems. HI 93124 is a portable haze meter specially designed for application in breweries. The instrument is also provided with a log-on-demand feature, which allows the user to store up to 199 samples into the internal memory. HI 93124 can be connected to a PC through an RS232 serial port with HI 92000 Windows® compatible software. Principle of Operation HI 93124 has been designed to perform measurements according to the EBC (European Brewery Convention) standard. The instrument functions by passing a beam of infrared light through a cuvet containing the sample being measured. The light source is a high emission infrared LED with a wavelength ensuring that the interference caused by colored samples is minimum. A sensor positioned at 90° with respect to the direction of light scattered by the un-dissolved particles present in the sample.

HI 93124 is supplied complete with 2 glass cuvets with caps, 4 alkaline batteries (1.5V AA), rugged carrying case and instructions.

Available Accessories:

HI 93124-0

|

Calibration standard @ 0 EBC, 30 mL

HI 93124-1

|

Calibration standard @ 2.5 EBC, 30 mL

HI 93124-2

|

Calibration standard @ 125 EBC, 30 mL

HI 93124-03

|

Calibration Kit: C124-0, C124-1 and C124-2

HI 731318

|

Tissue for wiping cuvets (4 pcs)

HI 731321

|

Spare glass cuvet (4 pcs)

HI 92000

|

Windows® compatible application software

HI 920011

|

Serial cable (5 to 9 pin) for PC connection

HI 93703-50

|

Cuvet cleaning solution, 230 mL

Specifications:

Range

0.00 to 10.00 EBC; 10 to 250 EBC

Resolution

0.01 EBC; 1 EBC

Accuracy (@20°C/68°F)

±0.20 EBC ±3% of reading (0.00 to 10.00); ±1 EBC ±5% of reading (outside)

Calibration

3 points (0 EBC, 2.5 EBC, 125 EBC)

Light Source

infrared LED @ 890 nm

Light Life

life of the instrument

Light Detector

silicon photocell

Battery Type / Life

4 x 1.5V AA / 660 hours or 900 measurements; auto-off after 5 minutes of non-use

Environment

0 to 50°C (32 to 122°F); RH max 95% non-condensing

Dimensions

220 x 82 x 66 mm (8.7 x 3.2 x 2.6��)

Weight

510 g (1.1 lb.)

Portable Logging Turbidity Meter

• Good Laboratory Practice (GLP)
• Rugged and portable for field use
• Log-on-demand feature

HI 93703 series are microprocessor based turbidity meters that provide laboratory precision for field turbidity measurements. HANNA instruments®� HI 93703 is designed to provide you a simple yet accurate way to test turbidity on-site. These meters have two operating ranges; 0.00 to 50.00 FTUs, and 50 to 1000 FTUs that can accommodate the most turbid condition you may encounter. The HI 93703 is easy to calibrate (with 3 point calibration) using AMCO-EPA standards and is ISO 7027 compliant. The HI 93703-11 enhanced version features a real-time clock and internal logging for up to 199 measurements. Collected data can be downloaded to your management system using the Windows® compatible HI 92000 software. Both versions meet the requirements of GLP (Good Laboratory Practice) protocols for last calibration data storage.

HI 93703 is supplied complete with glass cuvet, batteries and instructions. HI 93703-11 is supplied complete with glass cuvet, batteries and instructions. HI 93703C, kit including HI 93703 and HI 731313 maintenance kit.

Available Accessories:

HI 731318

|

Tissue for wiping cuvets (4 pcs)

HI 731321

|

Spare measurement cuvets (4 pcs)

HI 731313