pHep^®4, pHep^®5 pH Testers

• Dual Level Display Showing pH & Temp.
• Rugged, Floating Waterproof Casing
• Replaceable pH Electrode Featuring an Extendable Junction

The waterproof pHep^® 4 and pHep^® 5 pH testers have a dual-level LCD that displays pH and °C or °F. At startup, pHep^® performs a self check then displays the remaining battery level to assure proper working condition. These testers also feature a stability indicator and hold feature to prompt the user when to take the reading & freeze the display for easy and accurate recording. These pH/Temperature meters have a stainless steel temperature probe for faster and more precise temperature measurement and auto-compensation. 1 or 2 point calibration is made simple with automatic recognition of both standard and NIST buffer sets. We have designed the new pHep® pH electrodes with an extendable reference junction and when the electrode finally is exhausted simply insert a new electrode cartridge!

HI 98127 (pHep^®4) is supplied complete with protective cap, electrode removal tool, batteries and instructions. HI 98128 (pHep^®5) is supplied complete with protective cap, electrode removal tool, batteries and instructions.

Available Accessories:

HI 73127

|

pH electrode for HI 98127 and HI 98128

HI 77400P

|

Cal. Kit (pH 4 & 7, 20 ml)

HI 77700P

|

Cal. Kit (pH 7, 20 ml, 10 pcs)

HI 770710P

|

Cal. Kit (pH 7 & 10, 20 ml)

HI 73128

|

Electrode removal tool

Specifications:

Range pHep^®4

-2.0 to 16.0 pH; 0.0 to 60.0 °C (32.0 to 140.0 °F)

Range pHep^®5

-2.00 to 16.00 pH; 0.0 to 60.0 °C (32.0 to 140.0 °F)

Resolution pHep^®4

0.1 pH; 0.1°C (0.1°F)

Resolution pHep^®5

0.01 pH; 0.1°C (0.1°F)

Accuracy pHep^®4

±0.1 pH; ±0.5°C (±1°F)

Accuracy pHep^®5

±0.05 pH; ±0.5°C (±1°F)

pH Calibration

automatic, at 1 or 2 points with 2 sets of memorized buffers

Temp. Compensation

automatic

Battery Type / Life

4 x 1.5V with BEPS / approx. 300 hours of continuous use

Environment

-5 to 50°C (23 to 122°F); RH max 100%

Dimensions

163 x 40 x 26 mm

Weight

100 g

HI 98111 Piccolo^® and HI 98112 Piccolo^®2

• Accuracy of a bench meter at the fraction of the cost
• Measures pH wherever you need to
• Sealed electrode designed to cope with humid & dusty conditions
• (not totally waterproof like the other testers)

PICCOLO^® is a revolutionary pH meter with a 4-in-1 electrode and amplifier. Conventional pH meters are susceptible to the weak high impedance signal which makes the electrode, connector, cable and meter delicate and vulnerable to noise, humidity and dirty environments. PICCOLO^® has overcome these problems with a pre-amplified electrode delivering a strong signal to the meter. The 4-in-1 interchangeable electrode is inexpensive and rugged and houses the pH sensor, reference system, temperature sensor and the amplifier module.

All PICCOLO^® models are supplied complete with pH electrode, pH 4.01 & pH 7.01 sachets, calibration screwdriver, batteries, rugged carrying case and instructions. HI 98111 (PICCOLO^®) is supplied with 90 mm HI 1280 amplified pH electrode HI 98112 (PICCOLO®2) is supplied with 160 mm HI 1290 amplified pH electrode.

Available Accessories:

HI 1280

|

Amplified pH Electrode (90 mm/3.5")

HI 1290

|

Amplified pH Electrode (160 mm/6.3")

HI 1295

|

Amplified pH Electrode (160 mm/6.3")

HI 77400P

|

Cal. Kit (pH 4 & 7, 20 ml, 5 pcs each)

HI 77700P

|

Cal. Kit (pH 7, 10 x 20 ml)

HI 770710P

|

Cal. Kit (pH 7 & 10, 20 ml, 5 pcs each)

HI 7004M

|

Buffer solution pH 4.01, 230 ml

HI 7007M

|

Buffer solution pH 7.01, 230 ml

HI 7010M

|

Buffer solution pH 10.01, 230 ml

HI 70300M

|

Storage solution, 230 ml

Specifications:

Range

1.00 to 13.00 pH

Resolution

0.01 pH

Accuracy (@20°C/68°F)

±0.01 pH

Typical EMC Deviation

±0.01 pH

pH Calibration

Manual two point through Offset and Slope trimmers

Temp. Compensation

Automatic from 32 to 158°F (0 to 70°C)

Battery Type / Life

3 x 1.4 Volts; approx. 100 hours of continuous use

Environment

32 to 122°F (0 to 50°C); RH 95%

Dimensions Piccolo^®

194 x 29 x 15 mm

Dimensions Piccolo^®2

265 x 29 x 15 mm

Weight Piccolo^®

70 g

Weight Piccolo^®2

70 g

Electrode Piccolo^®

HI 1280

Electrode Piccolo^®2

HI 1290

HI 98109 Skincheck^tm and HI 98110 Skincheck^tm 1

• High accuracy with 0.01 pH sensitivity
• Contoured electrode specifically designed to measure pH of scalp, hair and skin
• Long battery life: 3,000 hours of continuous use

The health and beauty industry has been searching for a professional product that can determine the pH value of scalp, hair strands and skin quickly, accurately and inexpensively. Skincheck^tm measures pH in just a few seconds with a special flat-tip electrode specifically designed to measure pH on body surfaces. Skincheck^tm has a measurement range that covers the full spectrum of hair and skin pH levels. Measurements are quickly displayed on a large easy-to-read LCD with an accuracy of 0.01. Skincheck^tm is an absolute must for Hair Care Specialists, Beauty Salons, Cosmeticians, Beauticians, Dermatologists & The Cosmetic Industry.

HI 98109 (Skincheck^tm) is supplied complete with HI 1413S/50 pH electrode, calibration screwdriver, batteries and instructions. HI 98110 (Skincheck^tm1) is supplied complete with HI 1413B/50 pH electrode with 1 m cable, calibration screwdriver, batteries and instructions.

Available Accessories:

HI 1413B/50

|

pH electrode, BNC for skincheck1

HI 1413S/50

|

pH electrode, screw-type for skincheck

HI 77400P

|

Cal. Kit (pH 4 & 7, 20 mL, 5 pcs each)

HI 77700P

|

Cal. Kit (pH 7, 10 x 20 mL)

HI 7004M

|

Buffer solution pH 4.01, 230 mL

HI 7007M

|

Buffer solution pH 7.01, 230 mL

HI 70300M

|

Storage solution, 230 mL

Specifications:

Range

0.00 to 14.00 pH

Resolution

0.01 pH

Accuracy (@20°C/68°F)

±0.2 pH

Typical EMC Deviation

±0.1 pH

pH Calibration

Manual 2 points through trimmers

Electrode

Skincheck: HI 1413S/50, Skincheck1: HI 1413B/50

Battery Type / Life

2 x 1.4V / 3000 hours approx. continuous use

Environment

32 to 122°F (0 to 50°C); RH 95%

Dimensions

2.6 x 2 x 1" (66 x 50 x 25 mm)

Weight

2.5 oz. (70 g)

HI 98304 EC Tester

• Quick and accurate Conductivity readings
• Pocket-sized and waterproof
• Graphite sensor for enhanced repeatability

The DiST^®4 tester is a reliable, pocket sized instrument that will give you quick and accurate readings of conductivity. This popular Conductivity tester has been redesigned to offer a host of improvements. The casing has been designed for increased strength, a better fit for holding and a large LCD for easy viewing. The graphite sensors provide better repeatability since they do not oxidize. The casing has been engineered to allow air bubbles to escape. The temperature sensor is exposed to provide faster response time. If calibration is necessary, simply submerge the electrode tip into calibration solution and adjust the easily accessible trimmer on the side of the tester.

HI 98304 (DiST^® 4) is supplied complete with protective cap, screwdriver, batteries and instructions.

Available Accessories:

HI 7030M

|

12.88 mS/cm @ 25°C cal. sol., 230 mL

HI 70030P

|

12.88 mS/cm @ 25°C cal. kit (25 x 20 mL)

HI 7031M

|

1413 µS/cm @ 25°C cal. sol., 230 mL

HI 70031P

|

1413 µS/cm @ 25°C cal. kit (25 x 20 mL)

HI 7032M

|

1382 ppm @ 25°C cal. sol., 230 mL

HI 70032P

|

1382 ppm @ 25°C cal. kit (25 x 20 mL)

HI 70442P

|

1500 ppm @ 25°C cal. kit (25 x 20 mL)

HI 70038P

|

6.44 ppt @ 25°C cal. kit (25 x 20 mL)

HI 7039M

|

5000 µS/cm @ 25°C cal. sol., 230 mL

HI 70039P

|

5000 µS/cm @ 25°C cal. kit (25 x 20 mL)

Specifications:

Range

19.99 mS/cm

Resolution

0.01 mS/cm

Accuracy (@20°C/68°F)

±2% Full Scale

Typical EMC Deviation

±2% Full Scale

Calibration Solution

HI 70039P

Calibration

Manual 1 point through trimmer

Temp. Compensation

Automatic from 0 to 50°C (32 to 122°F)

Battery Type / Life

4 x 1.4V / 150 hours approx. continuous use

Environment

0 to 50°C (32 to 122°F); RH 95%

Dimensions

175 x 41 x 23 mm (7.9 x 1.8 x 1")

Weight

78 g (2.7 oz.)

HI 98311 EC/TDS/Temp Tester

• Rugged, Floating Waterproof Casing
• Dual Level Display
• Replaceable Graphite Electrode

The original DiST^® (Dissolved Solids Tester) was first introduced in 1986 by HANNA instruments^®. Since then, the measurement of Conductivity and Total Dissolved Solids has never been easier. The DiST^®s ease-of-use, in combination with its affordability, made it the standard in EC and TDS measurement. HANNA instruments^® continues the tradition of innovation with the DiST^®5. We at HANNA instruments^® have always valued the comments and suggestions coming from our customers. For this series, we have included all the features you have asked for and more! The DiST^®5 includes features such as a replaceable graphite electrode, adjustable TDS ratio, temperature in °C or °F, automatic temperature compensation with adjustable ß, battery level indicator, stability indicator, automatic shut-off and automatic calibration all in a floating, waterproof casing. This 3-in-1 tester is unmatched in EC/TDS/Temperature measurement!

HI 98311 (DiST^®5) is supplied complete with protective cap, batteries, probe removal tool and instructions.

Available Accessories:

HI 73311

|

Probe for HI 98311 & HI 98312

HI 70031P

|

1413 µS/cm @ 25°C cal. kit (25 x 20 mL)

HI 70032P

|

1382 ppm @ 25°C cal. kit (25 x 20 mL)

HI 70038P

|

6.44 ppt @ 25°C cal. kit (25 x 20 mL)

HI 70030P

|

12.88 mS/cm @ 25°C cal. kit (25 x 20 mL)

HI 70442P

|

1500 ppm @ 25°C cal. kit (25 x 20 mL)

HI 73128

|

Electrode removal tool

Specifications:

Range

0 to 3999 µS/cm EC, 0 to 2000 ppm TDS, 0.0 to 60.0 °C or 32.0 to 140.0 °F

Resolution

1 µS/cm EC, 1 ppm TDS, 0.1 °C or 0.1 °F

Accuracy (@20°C/68°F)

±2% Full Scale EC & TDS, ±0.5 °C or ±1 °F

Typical EMC Deviation

±2% Full Scale EC & TDS, ±1 °C or ±2 °F

Calibration

Automatic 1 point at 1413 µS/cm

Conversion Factor

Adjustable from 0.45 to 1.00

Temp. Compensation

BETA (ß) = adjustable from 0.0 to 2.4 per °C in increments of 0.1

Environment

0 to 50°C (32 to 122°F); R.H. 100%

Battery Type / Life

4 x 1.5V / 100 hours

Dimensions

163 x 40 x 26 mm (6.4 x 1.6 x 1.0")

Weight

85 g (3 oz.)

pH and ORP Tester

• Simple to Use
• Highly Accurate
• Floating and Waterproof Body

The Combo series of combination waterproof testers with advanced functions now includes the new model HI 98121 for simultaneous pH and ORP measurements. HI 98121 also reads temperature, which is continuously displayed on the dual level LCD. The pH electrode fiber junction can be easily pulled out for replenishment. The pH electrode cartridge can be quickly replaced with the supplied electrode removal tool. The encapsulated external stainless steel temperature sensor provides a fast response due to its close proximity to the pH electrode. The HI 98121 works with common batteries and displays the percentage of battery life remaining when turned on. The stability indicator ensures reliable readings.

HI 98121 is supplied complete with protective cap, electrode removal tool, batteries and instructions.

Available Accessories:

HI 73127

|

Spare pH electrode

HI 73128

|

Electrode removal tool

HI 7020M

|

200/275 mV test solution, 230 mL

HI 7091M

|

Reducing solution, 230 mL

HI 7092M

|

Oxidizing solution, 230 mL

HI 70004P

|

pH 4.01 buffer solution, 20 mL

HI 70006P

|

pH 6.86 buffer solution, 20 mL

HI 70007P

|

pH 7.01 buffer solution, 20 mL

HI 70009P

|

pH 9.18 buffer solution, 20 mL

HI 70010P

|

pH 10.01 buffer solution, 20 mL

HI 70300M

|

Electrode storage solution, 230 mL

Specifications:

Range ORP

± 1000 mV

Range pH

-2.00 to 16.00 pH

Range Temp

-5.0 to 60.0°C / 23.0 to 140.0°F

Resolution ORP

1 mV

Resolution pH

0.01 pH

Resolution Temp

0.1°C / 0.1°F

Accuracy (@20°C/68°F) ORP

±2 mV

Accuracy (@20°C/68°F) pH

±0.05 pH

Accuracy (@20°C/68°F) Temp

±0.5°C / ±1°F

Calibration ORP

factory calibrated

Calibration pH

automatic, 1 or 2 points with 2 sets of memorized buffers

Temp. Compensation

automatic for pH readings

Electrode

HI 73127 replaceable pH electrode (included); fixed ORP sensor

Battery Type / Life

4 x 1.5V with BEPS / approx. 250 hours of continuous use; auto-off after 8 minutes of non-use

Environment

-5 to 50°C (23 to 122°F); RH max 100%

Dimensions

163 x 40 x 26 mm

Weight

100 g

Combo

• Temperature in °C and °F
• pH and conductivity, TDS
• Rugged, Floating Waterproof Casing
• Replaceable pH Electrode Featuring an Extendable Junction

The HI 98129 Combo waterproof tester offers high accuracy pH, EC/TDS and temperature measurements in a single tester! No more switching between meters for your routine measurements. The waterproof Combo (it even floats) has a large easy-to- read, dual-level LCD and automatic shut off. pH and EC/TDS readings are automatically compensated for the effects of temperature (ATC). This technologically advanced tester has a replaceable pH electrode cartridge with an extendable cloth junction as well as an EC/TDS graphite electrode that resists contamination by salts and other substances. This gives the meter a greatly extended life. Your tester no longer needs to be thrown away when the pH sensor is exhausted. The EC/TDS conversion factor is user selectable as well as the temperature compensation coefficient (ß). Fast, efficient, accurate and portable, the Combo pH, EC/TDS and temperature tester brings you all the features you've asked for and more!

HI 98129 is supplied complete with protective cap, electrode removal tool, batteries and instructions.

Available Accessories:

HI 73127

|

Replaceable pH electrode

HI 73128

|

Electrode removal tool

HI 7061M

|

Electrode cleaning solution, 230 mL

HI 70300M

|

Electrode storage solution, 230 mL

HI 70004P

|

pH 4.01 solution, 20 mL

HI 70007P

|

pH 7.01 solution, 20 mL

HI 70010P

|

pH 10.01 solution, 20 mL

HI 77400P

|

pH 4 & 7 solutions, 20 mL

HI 770710P

|

pH 10 & 7 solutions, 20 mL

HI 7004M

|

pH 4.01 solution, 230 mL bottle

HI 7007M

|

pH 7.01 solution, 230 mL bottle

HI 7010M

|

pH 10.01 solution, 230 mL bottle

HI 70030P

|

12.88 mS/cm @ 25°C cal. sol., 20 mL

HI 70031P

|

1413 µS/cm @ 25°C cal. sol., 20 mL

HI 70032P

|

1382 ppm @ 25°C cal. sol., 20 mL

HI 70038P

|

6.44 ppt @ 25°C cal. sol., 20 mL

HI 70442P

|

1500 ppm @ 25°C cal. sol., 20 mL

Specifications:

Range

0 to 3999 µS/cm EC, 0 to 2000 ppm TDS, 0.00 to 14.00 pH, 0.0 to 60.0 °C or 32.0 to 140.0 °F

Resolution

1 µS/cm EC, 1 ppm TDS, 0.01 pH, 0.1 °C or 0.1 °F

Accuracy (@20°C/68°F)

±2% F.S. EC/TDS, ±0.05 pH, ±0.5 °C or ±1 °F

Typical EMC Deviation

±2% F.S. EC/TDS, ±0.02 pH, ±1 °C or ±1 °F

Calibration

Automatic at 1 point EC/TDS, 1 or 2 points with 2 sets of memorized buffers pH

Temp. Compensation

BETA (ß) = adjustable from 0.0 to 2.4 per °C in increments of 0.1 EC/TDS, Automatic for pH

EC/TDS Conversion Factor

Adjustable from 0.45 to 1.00

Environment

0 to 50°C (32 to 122°F); R.H. 100%

Battery Type / Life

4 x 1.5V / 100 hours

Dimensions

163 x 40 x 26 mm (6.4 x 1.6 x 1.0")

Weight

85 g (3 oz.)

Checktemp^®4

• A folding probe makes the CheckTemp^® 4 small and easy to carry
• Cal-Check is performed each time the meter is turned on
• Ideal for Food Service Applications

The Checktemp^® 4 provides practical solutions to temperature measurement for food service. Special attention was given to the design of the Checktemp^®4. This thermometer fits comfortably and securely in your hand. The oversized liquid crystal display is easy to see and read. The fast responding, folding probe is made of high quality, stainless steel and can penetrate semi-frozen and semi-solid foods like meats, ice cream and cheeses. When you are finished using your Checktemp^® 4, wipe the probe clean and fold it away. The Checktemp^® 4 automatically turns OFF so you can safely carry it in your pocket. As you unfold the stainless steel probe, the Checktemp^®4 automatically turns ON and immediately performs a calibration test. This unique HANNA instruments^® feature, Cal-Check^®, provides the security of knowing you have accurate measurements. Cal-Check^® lets you know if your battery level is too low or if your thermometer requires re-calibration.

HI 151-00 (Checktemp^®4 C) is supplied complete with battery and instructions. HI 151-01 (Checktemp^®4 F) is supplied complete with battery and instructions.

Specifications:

Range

-58.0 to 428 °F, -50.0 to 220 °C

Resolution

0.1° (-58.0 to 199.9 °F), 1° (200 to 428 °F), 0.1° (-50 to 199.9 °C), 1° (200 to 220 °C)

Accuracy (@25°C/77°F)

±0.8°F ± 1 digit, ±0.4°C ± 1 digit

Typical EMC Deviation

±0.6 °F, ±0.3 °C

Calibration

Performed in factory

Calibration Check

Automatic at startup

Probe/Probe Dimensions

Stainless steel, penetration / 117 x 3.5 mm (6.75 x .187")

Battery Type / Life

1 x 1.5V AA / Approximately 25,000 hours (auto shut-off after 8 minutes)

Casing

New ergonomic design

Dimensions

165 x 50 x 20 mm (6.5 x 2 x 1")

Weight

100 g / (3.6 oz)

• Fast Response Time - Checktemp provides a reading within 20 seconds
• Ideal for HACCP Applications
• Compact and durable

Did you ever wish that your temperature measurements could be made a little easier, in clear digits with a better accuracy or even over a wider range without worrying about breakage or condensation? Checktemp is what you have been looking for! The Checktemp gives you a temperature readout from -50 to 150°C or -58 to 302°F in seconds on a large LCD with ±0.3°C or ±0.5°F accuracy. NO breakage, NO waste, NO injuries, NO difficulty in reading. Not even a parallax error by taking a wrong measurement due to the angle of view! Checktemp is provided with the unique Calibration function: This system guarantees the accuracy of your measurement at any time! The sharp-tip probe can easily penetrate semisolid products such as fruits, vegetables and cheese, making routine control simple and quick for both incoming and outgoing goods. The AISI 316 stainless steel material of the probe is in compliance with food regulations. Checktemp is the ideal instrument for measuring temperature according to HACCP requirements. The Checktemp L models feature a round tip probe for liquid measurements.

HI 98501 (Checktemp C) is supplied complete with penetration probe, protective cap, battery and instructions. HI 98505 (Checktemp L C) is supplied complete with probe for liquid measurement, protective cap, battery and instructions. HI 98502 (Checktemp F) is supplied complete with penetration probe, protective cap, battery and instructions. HI 98506 (Checktemp L F) is supplied complete with probe for liquid measurement, protective cap, battery and instructions.

Specifications:

Range

-58.0 to +302°F, -50.0 to +150.0°C

Resolution

0.1°F (-58.0 to 199.9°F); 1°F (200 to 302°F), 0.1°C

Accuracy (@20°C/68°F)

±0.5°F (-4 to +194°F); ±1°F (outside) , ±0.3°C (-20 to +90°C); ±0.5°C (outside)

Battery Type / Life

1 x 1.4 volt battery, 3000 hours of continuous use

Environment

32 to 122°F (0 to 50°C); RH 95%

Dimensions

2.6 x 2.0 x 1" (66 x 50 x 25 mm)

Weight

1.8 oz. (50 g)

Probe

Stainless Steel, 105 X 3mm with a protective cap